function varargout = spm_spm_ui(varargin)
% Setting up the general linear model for independent data
% FORMATs (given in Programmers Help)
%_______________________________________________________________________
%
% spm_spm_ui.m configures the design matrix (describing the general
% linear model), data specification, and other parameters necessary for
% the statistical analysis. These parameters are saved in a
% configuration file (SPM.mat) in the current directory, and are
% passed on to spm_spm.m which estimates the design. Inference on these
% estimated parameters is then handled by the SPM results section.
%
% A separate program (spm_spm_fmri_ui.m) handles design configuration
% for fMRI time series, though this program can be used for fMRI data
% when observations can be regarded as independent.
%
% ----------------------------------------------------------------------
%
% Various data and parameters need to be supplied to specify the design:
%       * the image files
%       * indicators of the corresponding condition/subject/group
%       * any covariates, nuisance variables, or design matrix partitions
%       * the type of global normalisation (if any)
%       * grand mean scaling options
%       * thresholds and masks defining the image volume to analyse
%
% The interface supports a comprehensive range of options for all these
% parameters, which are described below in the order in which the
% information is requested. Rather than ask for all these parameters,
% spm_spm_ui.m uses a "Design Definition", a structure describing the
% options and defaults appropriate for a particular analysis. Thus,
% once the user has chosen a design, a subset of the following prompts
% will be presented.
%
% If the pre-specified design definitions don't quite have the combination
% of options you want, you can pass a custom design structure D to be used
% as parameter: spm_spm_ui('cfg',D). The format of the design structure
% and option definitions are given in the programmers help, at the top of
% the main body of the code.
%
%                           ----------------
%
% Design class & Design type
% ==========================
%
% Unless a design definition is passed to spm_spm_ui.m as a parameter,
% the user is prompted first to select a design class, and then to
% select a design type from that class.
%
% The designs are split into three classes:
%   i) Basic stats: basic models for simple statistics
%      These specify designs suitable for simple voxel-by-voxel analyses.
%       - one-sample t-test
%       - two-sample t-test
%       - paired t-test
%       - one way Anova
%       - one way Anova (with constant)
%       - one way Anova (within subject)
%       - simple regression (equivalent to correlation)
%       - multiple regression
%       - multiple regression  (with constant)
%       - basic AnCova (ANalysis of COVAriance)
%         (essentially a two-sample t-test with a nuisance covariate)
%
%  ii) PET models: models suitable for analysis of PET/SPECT experiments
%       - Single-subject: conditions & covariates
%       - Single-subject: covariates only
%
%       - Multi-subj: conditions & covariates
%       - Multi-subj: cond x subj  interaction & covariates
%       - Multi-subj: covariates only
%       - Multi-group: conditions & covariates
%       - Multi-group: covariates only
%
%       - Population main effect: 2 cond's, 1 scan/cond (paired t-test)
%       - Dodgy population main effect: >2 cond's, 1 scan/cond
%       - Compare-populations: 1 scan/subject (two sample t-test)
%       - Compare-populations: 1 scan/subject (AnCova)
%
%       - The Full Monty... (asks you everything!)
%
% iii) SPM96 PET models: models used in SPM96 for PET/SPECT
%      These models are provided for backward compatibility, but as they
%      don't include some of the advanced modelling features, we recommend
%      you switch to the new (SPM99) models at the earliest opportunity.
%       - SPM96:Single-subject: replicated conditions
%       - SPM96:Single-subject: replicated conditions & covariates
%       - SPM96:Single-subject: covariates only
%       - SPM96:Multi-subject: different conditions
%       - SPM96:Multi-subject: replicated conditions
%       - SPM96:Multi-subject: different conditions & covariates
%       - SPM96:Multi-subject: replicated conditions & covariates
%       - SPM96:Multi-subject: covariates only
%       - SPM96:Multi-group: different conditions
%       - SPM96:Multi-group: replicated conditions
%       - SPM96:Multi-group: different conditions & covariates
%       - SPM96:Multi-group: replicated conditions & covariates
%       - SPM96:Multi-group: covariates only
%       - SPM96:Compare-groups: 1 scan per subject
%
%
% Random effects, generalisability, population inference...
% =========================================================
%
% Note that SPM only considers a single component of variance, the
% residual error variance. When there are repeated measures, all
% analyses with SPM are fixed effects analyses, and inference only
% extends to the particular subjects under consideration (at the times
% they were imaged).
%
% In particular, the multi-subject and multi-group designs ignore the
% variability in response from subject to subject. Since the
% scan-to-scan (within-condition, within-subject variability is much
% smaller than the between subject variance which is ignored), this can
% lead to detection of group effects that are not representative of the
% population(s) from which the subjects are drawn. This is particularly
% serious for multi-group designs comparing two groups. If inference
% regarding the population is required, a random effects analysis is
% required.
%
% However, random effects analyses can be effected by appropriately
% summarising the data, thereby collapsing the model such that the
% residual variance for the new model contains precisely the variance
% components needed for a random effects analysis. In many cases, the
% fixed effects models here can be used as the first stage in such a
% two-stage procedure to produce appropriate summary data, which can
% then be used as raw data for a second-level analysis. For instance,
% the "Multi-subj: cond x subj  interaction & covariates" design can be
% used to write out an image of the activation for each subject. A
% simple t-test on these activation images then turns out to be
% equivalent to a mixed-effects analysis with random subject and
% subject by condition interaction effects, inferring for the
% population based on this sample of subjects (strictly speaking the
% design would have to be balanced, with equal numbers of scans per
% condition per subject, and also only two conditions per subject). For
% additional details, see spm_RandFX.man.
%
%                           ----------------
%
% Selecting image files & indicating conditions
% =============================================
%
% You may now be prompted to specify how many studies, subjects and
% conditions you have, and then will be promted to select the scans.
%
% The data should all have the same orientation and image and voxel size.
%
% File selection is handled by spm_select.m - the help for which describes
% efficient use of the interface.
%
% You may be asked to indicate the conditions for a set of scans, with
% a prompt like "[12] Enter conditions? (2)". For this particular
% example you need to indicate for 12 scans the corresponding
% condition, in this case from 2 conditions. Enter a vector of
% indicators, like '0 1 0 1...', or a string of indicators, like
% '010101010101' or '121212121212', or 'rararararara'. (This
% "conditions" input is handled by spm_input.m, where comprehensive
% help can be found.)
%
%                           ----------------
%
% Covariate & nuisance variable entry
% ===================================
%
% * If applicable, you'll be asked to specify covariates and nuisance
% variables. Unlike SPM94/5/6, where the design was partitioned into
% effects of interest and nuisance effects for the computation of
% adjusted data and the F-statistic (which was used to thresh out
% voxels where there appeared to be no effects of interest), SPM99 does
% not partition the design in this way. The only remaining distinction
% between effects of interest (including covariates) and nuisance
% effects is their location in the design matrix, which we have
% retained for continuity.  Pre-specified design matrix partitions can
% be entered. (The number of covariates / nuisance variables specified,
% is actually the number of times you are prompted for entry, not the
% number of resulting design matrix columns.) You will be given the
% opportunity to name the covariate.
% 
% * Factor by covariate interactions: For covariate vectors, you may be
% offered a choice of interaction options. (This was called "covariate
% specific fits" in SPM95/6.) The full list of possible options is:
%       - <none>
%       - with replication
%       - with condition (across group)
%       - with subject (across group)
%       - with group
%       - with condition (within group)
%       - with subject (within group)
%
% * Covariate centering: At this stage may also be offered "covariate
% centering" options. The default is usually that appropriate for the
% interaction chosen, and ensures that main effects of the interacting
% factor aren't affected by the covariate. You are advised to choose
% the default, unless you have other modelling considerations. The full
% list of possible options is:
%       - around overall mean
%       - around replication means
%       - around condition means (across group)
%       - around subject means (across group)
%       - around group means
%       - around condition means (within group)
%       - around subject means (within group)
%       - <no centering>
%
%                           ----------------
%
% Global options
% ==============
%
% Depending on the design configuration, you may be offered a selection
% of global normalisation and scaling options:
%
% * Method of global flow calculation
%       - SPM96:Compare-groups: 1 scan per subject
%       - None (assumming no other options requiring the global value chosen)
%       - User defined (enter your own vector of global values)
%       - SPM standard: mean voxel value (within per image fullmean/8 mask)
%
% * Grand mean scaling : Scaling of the overall grand mean simply
% scales all the data by a common factor such that the mean of all the
% global values is the value specified. For qualitative data, this puts
% the data into an intuitively accessible scale without altering the
% statistics. When proportional scaling global normalisation is used
% (see below), each image is seperately scaled such that it's global
% value is that specified (in which case the grand mean is also
% implicitly scaled to that value). When using AnCova or no global
% normalisation, with data from different subjects or sessions, an
% intermediate situation may be appropriate, and you may be given the
% option to scale group, session or subject grand means seperately. The
% full list of possible options is:
%       - scaling of overall grand mean
%       - caling of replication grand means
%       - caling of condition grand means (across group)
%       - caling of subject grand means (across group)
%       - caling of group grand means
%       - caling of condition (within group) grand means
%       - caling of subject (within group) grand means
%       - implicit in PropSca global normalisation)
%       - no grand Mean scaling>'
%
% * Global normalisation option : Global nuisance effects are usually
% accounted for either by scaling the images so that they all have the
% same global value (proportional scaling), or by including the global
% covariate as a nuisance effect in the general linear model (AnCova).
% Much has been written on which to use, and when. Basically, since
% proportional scaling also scales the variance term, it is appropriate
% for situations where the global measurement predominantly reflects
% gain or sensitivity. Where variance is constant across the range of
% global values, linear modelling in an AnCova approach has more
% flexibility, since the model is not restricted to a simple
% proportional regression.
%
% Considering AnCova global normalisation, since subjects are unlikely
% to have the same relationship between global and local measurements,
% a subject-specific AnCova ("AnCova by subject"), fitting a different
% slope and intercept for each subject, would be preferred to the
% single common slope of a straight AnCova. (Assumming there's enough
% scans per subject to estimate such an effect.) This is basically an
% interaction of the global covariate with the subject factor. You may
% be offered various AnCova options, corresponding to interactions with
% various factors according to the design definition: The full list of
% possible options is:
%       - AnCova
%       - AnCova by replication
%       - AnCova by condition (across group)
%       - AnCova by subject (across group)
%       - AnCova by group
%       - AnCova by condition (within group)
%       - AnCova by subject (within group)
%       - Proportional scaling
%       - <no global normalisation>
%
% Since differences between subjects may be due to gain and sensitivity
% effects, AnCova by subject could be combined with "grand mean scaling
% by subject" to obtain a combination of between subject proportional
% scaling and within subject AnCova.
%
% * Global centering: Lastly, for some designs using AnCova, you will
% be offered a choice of centering options for the global covariate. As
% with covariate centering, this is only relevant if you have a
% particular interest in the parameter estimates. Usually, the default
% of a centering corresponding to the AnCova used is chosen. The full
% list of possible options is:
%       - around overall mean
%       - around replication means
%       - around condition means (across group)
%       - around subject means (across group)
%       - around group means
%       - around condition means (within group)
%       - around subject means (within group)
%       - <no centering>
%       - around user specified value
%       - (as implied by AnCova)
%       - GM (The grand mean scaled value)
%       - (redundant: not doing AnCova)
%
%
%
% Note that this is a logical ordering for the global options, which is
% not the order used by the interface due to algorithm constraints. The
% interface asks for the options in this order:
%       - Global normalisation
%       - Grand mean scaling options
%         (if not using proportional scaling global normalisation)
%       - Value for grand mean scaling  proportional scaling GloNorm
%         (if appropriate)
%       - Global centering options
%       - Value for global centering (if "user-defined" chosen)
%       - Method of calculation
%
%                           ----------------
%
% Masking options
% ===============
%
% The mask specifies the voxels within the image volume which are to be
% assessed. SPM supports three methods of masking. The volume analysed
% is the intersection of all masks:
%
%   i) Threshold masking : "Analysis threshold"
%       - images are thresholded at a given value and only voxels at
%         which all images exceed the threshold are included in the
%         analysis.
%       - The threshold can be absolute, or a proportion of the global
%         value (after scaling), or "-Inf" for no threshold masking.
%       - (This was called "Grey matter threshold" in SPM94/5/6)
%
%  ii) Implicit masking
%       - An "implicit mask" is a mask implied by a particular voxel
%         value. Voxels with this mask value are excluded from the
%         analysis.
%       - For image data-types with a representation of NaN
%         (see spm_type.m), NaN's is the implicit mask value, (and
%         NaN's are always masked out).
%       - For image data-types without a representation of NaN, zero is
%         the mask value, and the user can choose whether zero voxels
%          should be masked out or not.
%
% iii) Explicit masking
%       - Explicit masks are other images containing (implicit) masks
%         that are to be applied to the current analysis.
%       - All voxels with value NaN (for image data-types with a
%         representation of NaN), or zero (for other data types) are
%         excluded from the analysis.
%       - Explicit mask images can have any orientation and voxel/image
%         size. Nearest neighbour interpolation of a mask image is used if
%         the voxel centers of the input images do not coincide with that
%         of the mask image.
%
%
%                           ----------------
%
% Non-sphericity correction
% =========================
%
% In some instances the i.i.d. assumptions about the errors do not hold:
%
% Identity assumption:
% The identity assumption, of equal error variance (homoscedasticity), can
% be violated if the levels of a factor do not have the same error variance.
% For example, in a 2nd-level analysis of variance, one contrast may be scaled
% differently from another.  Another example would be the comparison of
% qualitatively different dependant variables (e.g. normals vs. patients).  If
% You say no to identity assumptions, you will be asked whether the error
% variance is the same over levels of each factor.  Different variances
% (heteroscedasticy) induce different error covariance components that
% are estimated using restricted maximum likelihood (see below).
%
% Independence assumption.
% In some situations, certain factors may contain random effects.  These induce
% dependencies or covariance components in the error terms.   If you say no 
% to independence assumptions, you will be asked whether random effects
% should be modelled for each factor.  A simple example of this would be
% modelling the random effects of subject.  These cause correlations among the
% error terms of observation from the same subject.  For simplicity, it is
% assumed that the random effects of each factor are i.i.d.  One can always
% re-specify the covariance components by hand in SPM.xVi.Vi for more
% complicated models
%
% ReML
% The ensuing covariance components will be estimated using ReML in spm_spm
% (assuming the same for all responsive voxels) and used to adjust the 
% statistics and degrees of freedom during inference. By default spm_spm
% will use weighted least squares to produce Gauss-Markov or Maximum
% likelihood estimators using the non-sphericity structure specified at this 
% stage. The components will be found in xX.xVi and enter the estimation 
% procedure exactly as the serial correlations in fMRI models.
% 
% see also: spm_reml.m and spm_non_sphericity.m
% 
%                           ----------------
%
% Multivariate analyses
% =====================
%
% Mulitvariate analyses with n-variate response variables are supported
% and automatically invoke a ManCova and CVA in spm_spm.  Multivariate
% designs are, at the moment limited to Basic and PET designs.
%
% ----------------------------------------------------------------------
%
% Variables saved in the SPM stucture
%
% xY.VY         - nScan x 1 struct array of memory mapped images
%                 (see spm_vol for definition of the map structure)
% xX            - structure describing design matrix
% xX.D          - design definition structure
%                 (See definition in main body of spm_spm_ui.m)
% xX.I          - nScan x 4 matrix of factor level indicators
%                 I(n,i) is the level of factor i corresponding to image n
% xX.sF         - 1x4 cellstr containing the names of the four factors
%                 xX.sF{i} is the name of factor i
% xX.X          - design matrix
% xX.xVi        - correlation constraints for non-spericity correction
% xX.iH         - vector of H partition (condition effects) indices,
%                 identifying columns of X correspoding to H
% xX.iC         - vector of C partition (covariates of interest) indices
% xX.iB         - vector of B partition (block effects) indices
% xX.iG         - vector of G partition (nuisance variables) indices
% xX.name     - p x 1 cellstr of effect names corresponding to columns
%                 of the design matrix
% 
% xC            - structure array of covariate details
% xC(i).rc      - raw (as entered) i-th covariate
% xC(i).rcname  - name of this covariate (string)
% xC(i).c       - covariate as appears in design matrix (after any scaling,
%                 centering of interactions)
% xC(i).cname   - cellstr containing names for effects corresponding to
%                 columns of xC(i).c
% xC(i).iCC     - covariate centering option
% xC(i).iCFI    - covariate by factor interaction option
% xC(i).type    - covariate type: 1=interest, 2=nuisance, 3=global
% xC(i).cols    - columns of design matrix corresponding to xC(i).c
% xC(i).descrip - cellstr containing a description of the covariate
% 
% xGX           - structure describing global options and values
% xGX.iGXcalc   - global calculation option used
% xGX.sGXcalc   - string describing global calculation used
% xGX.rg        - raw globals (before scaling and such like)
% xGX.iGMsca    - grand mean scaling option
% xGX.sGMsca    - string describing grand mean scaling
% xGX.GM        - value for grand mean (/proportional) scaling
% xGX.gSF       - global scaling factor (applied to xGX.rg)
% xGX.iGC       - global covariate centering option
% xGX.sGC       - string describing global covariate centering option
% xGX.gc        - center for global covariate
% xGX.iGloNorm  - Global normalisation option
% xGX.sGloNorm  - string describing global normalisation option
% 
% xM            - structure describing masking options
% xM.T          - Threshold masking value (-Inf=>None,
%                 real=>absolute, complex=>proportional (i.e. times global) )
% xM.TH         - nScan x 1 vector of analysis thresholds, one per image
% xM.I          - Implicit masking (0=>none, 1=>implicit zero/NaN mask)
% xM.VM         - struct array of explicit mask images
%                 (empty if no explicit masks)
% xM.xs         - structure describing masking options
%                 (format is same as for xsDes described below)
% 
% xsDes         - structure of strings describing the design:
%                 Fieldnames are essentially topic strings (use "_"'s for
%                 spaces), and the field values should be strings or cellstr's
%                 of information regarding that topic. spm_DesRep.m
%                 uses this structure to produce a printed description
%                 of the design, displaying the fieldnames (with "_"'s 
%                 converted to spaces) in bold as topics, with
%                 the corresponding text to the right
% 
% SPMid         - String identifying SPM and program versions
%
%                           ----------------
%
% NB: The SPM.mat file is not very portable: It contains
% memory-mapped handles for the images, which hardcodes the full file
% pathname and datatype. Therefore, subsequent to creating the
% SPM.mat, you cannot move the image files, and cannot move the
% entire analysis to a system with a different byte-order (even if the
% full file pathnames are retained. Further, the image scalefactors
% will have been pre-scaled to effect any grand mean or global
% scaling.
%_______________________________________________________________________
% Copyright (C) 2008 Wellcome Trust Centre for Neuroimaging

% Andrew Holmes
% $Id: spm_spm_ui.m 4419 2011-08-03 18:42:35Z guillaume $

SCCSid  = '$Rev: 4419 $';

%=======================================================================
% - FORMAT specifications for programers
%=======================================================================
%( This is a multi function function, the first argument is an action  )
%( string, specifying the particular action function to take.          )
%
% FORMAT spm_spm_ui('CFG',D)
% Configure design
% D       - design definition structure - see format definition below
% (If D is a struct array, then the user is asked to choose from the
% design definitions in the array. If D is not specified as an
% argument, then user is asked to choose from the standard internal
% definitions)
%
% FORMAT [P,I] = spm_spm_ui('Files&Indices',DsF,Dn,DbaTime)
% PET/SPECT file & factor level input
% DsF     - 1x4 cellstr of factor names (ie D.sF)
% Dn      - 1x4 vector indicating the number of levels (ie D.n)
% DbaTime - ask for F3 images in time order, with F2 levels input by user?
% P       - nScan x 1 cellsrt of image filenames
% I       - nScan x 4 matrix of factor level indices
%
% FORMAT D = spm_spm_ui('DesDefs_Stats')
% Design definitions for simple statistics
% D      - struct array of design definitions (see definition below)
%
% FORMAT D = spm_spm_ui('DesDefs_PET')
% Design definitions for PET/SPECT models
% D      - struct array of design definitions (see definition below)
%
% FORMAT D = spm_spm_ui('DesDefs_PET96')
% Design definitions for SPM96 PET/SPECT models
% D      - struct array of design definitions (see definition below)

%=======================================================================
% Design definitions specification for programers & power users
%=======================================================================
% Within spm_spm_ui.m, a definition structure, D, determines the
% various options, defaults and specifications appropriate for a
% particular design. Usually one uses one of the pre-specified
% definitions chosen from the menu, which are specified in the function
% actions at the end of the program (spm_spm_ui('DesDefs_Stats'),
% spm_spm_ui('DesDefs_PET'), spm_spm_ui('DesDefs_PET96')). For
% customised use of spm_spm_ui.m, the design definition structure is
% shown by the following example:
%
% D = struct(...
%       'DesName','The Full Monty...',...
%       'n',[Inf Inf Inf Inf],  'sF',{{'repl','cond','subj','group'}},...
%       'Hform',                'I(:,[4,2]),''-'',{''stud'',''cond''}',...
%       'Bform',                'I(:,[4,3]),''-'',{''stud'',''subj''}',...
%       'nC',[Inf,Inf],'iCC',{{[1:8],[1:8]}},'iCFI',{{[1:7],[1:7]}},...
%       'iGXcalc',[1,2,3],'iGMsca',[1:7],'GM',50,...
%       'iGloNorm',[1:9],'iGC',[1:11],...
%       'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
%       'b',struct('aTime',1));
%
% ( Note that the struct command expands cell arrays to give multiple    )
% ( records, so if you want a cell array as a field value, you have to   )
% ( embed it within another cell, hence the double "{{"'s.               )
%
%                           ----------------
%
% Design structure fields and option definitions
% ==============================================
%
% D.Desname  - a string naming the design
%
% In general, spm_spm_ui.m accomodates four factors. Usually these are
% 'group', 'subject', 'condition' & 'replication', but to allow for a
% flexible interface these are dynamically named for different designs,
% and are referred to as Factor4, Factor3, Factor2, and Factor1
% respectively. The first part of the D definition dictates the names
% and number of factor levels (i.e. number of subjects etc.) relevant
% for this design, and also how the H (condition) and B (block)
% partitions of the design matrix should be constructed.
%
% D.n        - a 1x4 vector, indicating the number of levels. D.n(i)
%              for i in [1:4] is the number of levels for factor i.
%              Specify D.n(i) as 1 to ignore this factor level,
%              otherwise the number of levels can be pre-specified as a
%              given number, or given as Inf to allow the user to
%              choose the number of levels.
%
% D.sF       - a 1x4 cellstr containing the names of the four
%              factors. D.sF{i} is the name of factor i.
%
% D.b.aTime  - a binary indicator specifying whether images within F3
%              level (subject) are selected in time order. For time
%              order (D.b.aTime=1), F2 levels are indicated by a user
%              input "condition" string (input handled by spm_input's
%              'c' type). When (D.b.aTime=0), images for each F3 are
%              selected by F2 (condition). The latter was the mode of
%              SPM95 and SPM96. (SPM94 and SPMclassic didn't do
%              replications of conditions.)
%
% Once the user has entered the images and indicated the factor levels,
% a nScan x 4 matrix, I, of indicator variables is constructed
% specifying for each scan the relevant level of each of the four
% factors. I(n,i) is the level of factor i corresponding to image n.
% This I matrix of factor indicators is then used to construct the H
% and B forms of the design matrix according to the prescripton in the
% design definition D:
%
% D.Hform    - a string specifying the form of the H partition of the
%              design matrix. The string is evaluated as an argument
%              string for spm_DesMtx, which builds design matrix
%              partitions from indicator vectors.
%             (eval(['[H,Hnames] = spm_DesMtx(',D.Hform,');']))
%
% D.BForm   - a string specifying the form of the G partition.
%
% ( Note that a constant H partition is dropped if the B partition can   )
% ( model the constant effect.                                           )
%
% The next part of the design definition defines covariate options.
% Covariates are split into covariates (of interest) and nuisance
% variables. The covariates of interest and nuisance variables are put
% into the C & G partitions of the design matrox (the final design
% matrix is [H,C,B,G], where global nuisance covariates are appended to
% G). In SPM94/5/6 the design matrix was partitioned into effects of
% interest [H,C] and effects of no interest [B,G], with an F-test for
% no effects of interest and adjusted data (for effects of no interest)
% following from these partitions. SPM99 is more freestyle, with
% adjustments and F-tests specified by contrasts. However, the concept
% of effects of interest and of no interest has been maintained for
% continuity, and spm_spm_ui.m computes an F-contrast to test for "no
% effects of interest".
%
% D.nC       - a 1x2 vector: D.nC(1) is the number of covariates,
%              D.nC(2) the number of nuisance variables. Specify zero
%              to skip covariate entry, the actual number of
%              covariates, or Inf to let the user specify the number of
%              covariates. As with earlier versions, blocks of design
%              matrix can be entered. However, these are now treated as
%              a single covariate entity, so the number of
%              covariates.nuisance variables is now the number of items
%              you are prompted for, regardless of their dimension. (In
%              SPM95-6 this number was the number of covariate vectors
%              that could be entered.)
%
% D.iCC      - a 1x2 cell array containing two vectors indicating the
%              allowable covariate centering options for this design.
%              These options are defined in the body of spm_spm_ui.m,
%              in variables sCC & CFIforms. Use negative indices to
%              indicate the default, if any - the largest negative
%              wins.
%
% D.iCFI     - a 1x2 cell array containing two vectors indicating the
%              allowable covariate by factor interactions for this
%              design. Interactions are only offered with a factor if
%              it has multiple levels. The options are defined in the
%              body of spm_spm_ui.m, in variables sCFI & CFIforms. Use
%              negative indicies to indicate a default.
%
% The next part defines global options:
%
% D.iGXcalc  - a vector of possible global calculation options for
%              this design, as listed in the body of spm_spm_ui.m in
%              variable sGXcalc. (If other global options are chosen,
%              then the "omit" option is not offered.) Again, negative
%              values indicate a default.
%
% D.iGloNorm - a vector of possible global normalisation options for
%              this design, as described in the body of spm_spm_ui.m in
%              variable sGloNorm.
%
% D.iGMsca   - a vector of possible grand mean scaling options, as
%              described in the body of spm_spm_ui.m in variable
%              sGMsca. (Note that grand mean scaling is redundent when
%              using proportional scaling global flow normalisation.)
%
% D.iGC      - a vector of possible global covariate centering
%              options, corresponding to the descriptions in variable
%              iCC given in the body of spm_spm_ui.m. This is only
%              relevant for AnCova type global normalisation, and even
%              then only if you're actually interested in constraining
%              the values of the parameters in some useful way.
%              Usually, one chooses option 10, "as implied by AnCova".
%
% The next component specifies masking options:
%
% D.M_.T     - a vector defining the analysis threshold: Specify
%              "-Inf" as an element to offer "None" as an option. If a
%              real element is found, then absolute thresholding is
%              offered, with the first real value proffered as default
%              threshold. If an imaginary element is found, then
%              proportional thresholding if offered (i.e. the threshold
%              is a proportion of the image global), with the (abs of)
%              the first imaginary element proffered as default.
%
% D.M_.I     - Implicit masking? 0-no, 1-yes, Inf-ask. (This is
%              irrelevant for image types with a representation of NaN,
%              since NaN is then the mask value, and NaN's are always
%              masked.)
%
% D.M.X      - Explicit masking? 0-no, 1-yes, Inf-ask.
% 
%                           ----------------
%
% To use a customised design structure D, type spm_spm_ui('cfg',D) in the
% Matlab command window.
%
% The easiest way to generate a customised design definition structure
% is to tweak one of the pre-defined definitions. The following code
% will prompt you to select one of the pre-defined designs, and return
% the design definition structure for you to work on:
%
% D = spm_spm_ui(char(spm_input('Select design class...','+1','m',...
%       {'Basic stats','Standard PET designs','SPM96 PET designs'},...
%       {'DesDefs_Stats','DesDefs_PET','DesDefs_PET96'},2)));
% D = D(spm_input('Select design type...','+1','m',{D.DesName}'))
%
%_______________________________________________________________________
% @(#)spm_spm_ui.m  2.54 Andrew Holmes 04/12/09


%-Condition arguments
%-----------------------------------------------------------------------
if (nargin==0), Action = 'CFG'; else, Action = varargin{1}; end


switch lower(Action)
case 'cfg'
    %===================================================================
    % - C O N F I G U R E   D E S I G N
    %===================================================================
    % spm_spm_ui('CFG',D)
    if nargin<2, D = []; else, D = varargin{2}; end
    
    %-GUI setup
    %-------------------------------------------------------------------
    SPMid = spm('FnBanner',mfilename,SCCSid);
    [Finter,Fgraph,CmdLine] = spm('FnUIsetup','Stats: Setup analysis',0);
    spm_help('!ContextHelp',mfilename)
    
    
    %-Ask about overwriting files from previous analyses...
    %-------------------------------------------------------------------
    if exist(fullfile('.','SPM.mat'))
        str = { 'Current directory contains existing SPM file:',...
                'Continuing will overwrite existing file!'};
        if spm_input(str,1,'bd','stop|continue',[1,0],1,mfilename);
            fprintf('%-40s: %30s\n\n',...
                'Abort...   (existing SPM file)',spm('time'))
            spm_clf(Finter)
            return
        end
    end
    
    
    
    %-Option definitions
    %-------------------------------------------------------------------
    %-Generic factor names
    sF = {'sF1','sF2','sF3','sF4'};
    
    %-Covariate by factor interaction options
    sCFI = {'<none>';...                            %-1
            'with sF1';'with sF2';'with sF3';'with sF4';...         %-2:5
            'with sF2 (within sF4)';'with sF3 (within sF4)'};       %-6,7
    
    %-DesMtx argument components for covariate by factor interaction options
    % (Used for CFI's Covariate Centering (CC), GMscale & Global normalisation)
    CFIforms = {    '[]',       'C',    '{}';...            %-1
            'I(:,1)',       'FxC',  '{D.sF{1}}';...         %-2
            'I(:,2)',       'FxC',  '{D.sF{2}}';...         %-3
            'I(:,3)',       'FxC',  '{D.sF{3}}';...         %-4
            'I(:,4)',       'FxC',  '{D.sF{4}}';...         %-5
            'I(:,[4,2])',   'FxC',  '{D.sF{4},D.sF{2}}';... %-6
            'I(:,[4,3])',   'FxC',  '{D.sF{4},D.sF{3}}' };  %-7
    
    %-Centre (mean correction) options for covariates & globals            (CC)
    % (options 9-12 are for centering of global when using AnCova GloNorm) (GC)
    sCC = {     'around overall mean';...               %-1
            'around sF1 means';...                  %-2
            'around sF2 means';...                  %-3
            'around sF3 means';...                  %-4
            'around sF4 means';...                  %-5
            'around sF2 (within sF4) means';...         %-6
            'around sF3 (within sF4) means';...         %-7
            '<no centering>';...                    %-8
            'around user specified value';...           %-9
            '(as implied by AnCova)';...                %-10
            'GM';...                        %-11
            '(redundant: not doing AnCova)'}';          %-12
    %-DesMtx I forms for covariate centering options
    CCforms = {'ones(nScan,1)',CFIforms{2:end,1},''}';
    
    
    %-Global normalization options (options 1-7 match CFIforms)       (GloNorm)
    sGloNorm = {    'AnCova';...                        %-1
            'AnCova by sF1';...                 %-2
            'AnCova by sF2';...                 %-3
            'AnCova by sF3';...                 %-4
            'AnCova by sF4';...                 %-5
            'AnCova by sF2 (within sF4)';...            %-6
            'AnCova by sF3 (within sF4)';...            %-7
            'proportional scaling';...              %-8
            '<no global normalisation>'};               %-9
    
    %-Grand mean scaling options                                        (GMsca)
    sGMsca = {  'scaling of overall grand mean';...         %-1
            'scaling of sF1 grand means';...            %-2
            'scaling of sF2 grand means';...            %-3
            'scaling of sF3 grand means';...            %-4
            'scaling of sF4 grand means';...            %-5
            'scaling of sF2 (within sF4) grand means';...       %-6
            'scaling of sF3 (within sF4) grand means';...       %-7
            '(implicit in PropSca global normalisation)';...    %-8
            '<no grand Mean scaling>'   };          %-9
    %-NB: Grand mean scaling by subject is redundent for proportional scaling
    
    
    %-Global calculation options                                       (GXcalc)
    sGXcalc  = {    'omit';...                      %-1
            'user specified';...                    %-2
            'mean voxel value (within per image fullmean/8 mask)'}; %-3
    
    
    
    %===================================================================
    %-D E S I G N   P A R A M E T E R S
    %===================================================================
    %-Get design type
    %-------------------------------------------------------------------
    if isempty(D)
        
        D = spm_spm_ui( ...
            char(spm_input('Select design class...','+1','m',...
            {'Basic stats','Standard PET designs','SPM96 PET designs'},...
            {'DesDefs_Stats','DesDefs_PET','DesDefs_PET96'},2)));
    end
    
    D = D(spm_input('Select design type...','+1','m',{D.DesName}'));
    
    
    %-Set factor names for this design
    %-------------------------------------------------------------------
    sCC      = sf_estrrep(sCC,[sF',D.sF']);
    sCFI     = sf_estrrep(sCFI,[sF',D.sF']);
    sGloNorm = sf_estrrep(sGloNorm,[sF',D.sF']);
    sGMsca   = sf_estrrep(sGMsca,[sF',D.sF']);
    
    %-Get filenames & factor indicies
    %-------------------------------------------------------------------
    [P,I]    = spm_spm_ui('Files&Indices',D.sF,D.n,D.b.aTime);
    nScan    = size(I,1);                       %-#obs
    
    %-Additional design parameters
    %-------------------------------------------------------------------
    bL       = any(diff(I,1),1);    %-Multiple factor levels?
    % NB: bL(2) might be thrown by user specified f1 levels
    %     (D.b.aTime & D.n(2)>1) - assumme user is consistent?
    bFI      = [bL(1),bL(2:3)&~bL(4),bL(4),bL([2,3])&bL(4)];
    %-Allowable interactions for covariates
    %-Only offer interactions with multi-level factors, and
    % don't offer by F2|F3 if bL(4)!
    
    %-Build Condition (H) and Block (B) partitions
    %===================================================================
    H=[];Hnames=[];
    B=[];Bnames=[];
    eval(['[H,Hnames] = spm_DesMtx(',D.Hform,');'])
    if rank(H)==nScan, error('unestimable condition effects'), end
    eval(['[B,Bnames] = spm_DesMtx(',D.Bform,');'])
    if rank(B)==nScan, error('unestimable block effects'), end
    
    %-Drop a constant H partition if B partition can model constant
    if size(H,2)>0 & all(H(:)==1) & (rank([H B])==rank(B))
        H = []; Hnames = {};
        warning('Dropping redundant constant H partition')
    end
    
    
    %-Covariate partition(s): interest (C) & nuisance (G) excluding global
    %===================================================================
    nC = D.nC;                       %-Default #covariates
    C  = {[],[]}; Cnames = {{},{}};  %-Covariate DesMtx partitions & names
    xC = [];                         %-Struct array to hold raw covariates
    
    
    dcname = {'CovInt','NusCov'};   %-Default root names for covariates
    dstr   = {'covariate','nuisance variable'};
    
    GUIpos = spm_input('!NextPos');
    nc     = [0,0];
    for i  = 1:2            % 1:covariates of interest, 2:nuisance variables
        
        if isinf(nC(i)), nC(i)=spm_input(['# ',dstr{i},'s'],GUIpos,'w1'); end
        
        while nc(i) < nC(i)
            
            %-Create prompt, get covariate, get covariate name
            %-----------------------------------------------------------
            if nC(i)==1
                str=dstr{i};
            else
                str=sprintf('%s %d',dstr{i},nc(i)+1);
            end
            c      = spm_input(str,GUIpos,'r',[],[nScan,Inf]);
            if any(isnan(c(:))), break, end     %-NaN is dummy value to exit
            nc(i)  = nc(i)+1;                   %-#Covariates (so far)
            if nC(i)>1, tstr = sprintf('%s^{%d}',dcname{i},nc(i));
            else,       tstr = dcname{i}; end
            cname  = spm_input([str,' name?'],'+1','s',tstr);
            rc     = c;                         %-Save covariate value
            rcname = cname;                     %-Save covariate name
            
            %-Interaction option? (if single covariate vector entered)?
            %-----------------------------------------------------------
            if size(c,2) == 1
                %-User choice of interaction options, default is negative
                %-Only offer interactions for appropriate factor combinations
                if length(D.iCFI{i})>1
                    iCFI = intersect(abs(D.iCFI{i}),find([1,bFI]));
                    dCFI = max([1,intersect(iCFI,-D.iCFI{i}(D.iCFI{i}<0))]);
                    iCFI = spm_input([str,': interaction?'],'+1','m',...
                        sCFI(iCFI),iCFI,find(iCFI==dCFI));
                else
                    iCFI = abs(D.iCFI{i});     %-AutoSelect default option
                end
            else
                iCFI = 1;
            end
            
            %-Centre covariate(s)? (Default centring to correspond to CFI)
            % Always offer "no centering" as default for design matrix blocks
            %-----------------------------------------------------------
            DiCC = D.iCC{i};
            if size(c,2)>1, DiCC = union(DiCC,-8); end
            if length(DiCC)>1
                %-User has a choice of centering options
                %-Only offer factor specific for appropriate factor combinations
                iCC = intersect(abs(DiCC),find([1,bFI,1]) );
                %-Default is max -ve option in D, overridden by iCFI if CFI
                if iCFI == 1, dCC = -DiCC(DiCC<0); else, dCC = iCFI; end
                dCC = max([1,intersect(iCC,dCC)]);
                iCC = spm_input([str,': centre?'],'+1','m',...
                    sCC(iCC),iCC,find(iCC==dCC));
            else
                iCC = abs(DiCC);    %-AutoSelect default option
            end
            %-Centre within factor levels as appropriate
            if any(iCC == [1:7]), c = c - spm_meanby(c,eval(CCforms{iCC})); end
            
            %-Do any interaction (only for single covariate vectors)
            %-----------------------------------------------------------
            if iCFI > 1             %-(NB:iCFI=1 if size(c,2)>1)
                tI        = [eval(CFIforms{iCFI,1}),c];
                tConst    = CFIforms{iCFI,2};
                tFnames   = [eval(CFIforms{iCFI,3}),{cname}];
                [c,cname] = spm_DesMtx(tI,tConst,tFnames);
            elseif size(c,2)>1          %-Design matrix block
                [null,cname] = spm_DesMtx(c,'X',cname);
            else
                cname = {cname};
            end
            
            %-Store raw covariate details in xC struct for reference
            %-Pack c into appropriate DesMtx partition
            %-----------------------------------------------------------
            %-Construct description string for covariate
            str = {sprintf('%s: %s',str,rcname)};
            if size(rc,2)>1, str = {sprintf('%s (block of %d covariates)',...
                        str{:},size(rc,2))}; end
            if iCC < 8, str=[str;{['used centered ',sCC{iCC}]}]; end
            if iCFI> 1, str=[str;{['fitted as interaction ',sCFI{iCFI}]}]; end
            
            tmp       = struct( 'rc',rc,    'rcname',rcname,...
                'c',c,      'cname',{cname},...
                'iCC',iCC,  'iCFI',iCFI,...
                'type',i,...
                'cols',[1:size(c,2)] + ...
                size([H,C{1}],2) +  ...
                size([B,C{2}],2)*(i-1),...
                'descrip',{str}             );
            if isempty(xC), xC = tmp; else, xC = [xC,tmp]; end
            C{i}      = [C{i},c];
            Cnames{i} = [Cnames{i}; cname];
            
        end % (while)
        
    end % (for)
    clear c tI tConst tFnames
    spm_input('!SetNextPos',GUIpos);
    
    %-Unpack into C & G design matrix sub-partitions
    G = C{2}; Gnames = Cnames{2};
    C = C{1}; Cnames = Cnames{1};
    
    
    %-Options...
    %===================================================================
    %-Global normalization options                             (GloNorm)
    %-------------------------------------------------------------------
    if length(D.iGloNorm)>1
        %-User choice of global normalisation options, default is negative
        %-Only offer factor specific for appropriate factor combinations
        iGloNorm = intersect(abs(D.iGloNorm),find([1,bFI,1,1]));
        dGloNorm = max([0,intersect(iGloNorm,-D.iGloNorm(D.iGloNorm<0))]);
        iGloNorm = spm_input('GloNorm: Select global normalisation','+1','m',...
            sGloNorm(iGloNorm),iGloNorm,find(iGloNorm==dGloNorm));
    else
        iGloNorm = abs(D.iGloNorm);
    end
    
    
    %-Grand mean scaling options                                 (GMsca)
    %-------------------------------------------------------------------
    if iGloNorm==8
        iGMsca=8;   %-grand mean scaling implicit in PropSca GloNorm
    elseif length(D.iGMsca)==1
        iGMsca = abs(D.iGMsca);
    else
        %-User choice of grand mean scaling options
        %-Only offer factor specific for appropriate factor combinations
        iGMsca = intersect(abs(D.iGMsca),find([1,bFI,0,1]));
        %-Default is max -ve option in D, overridden by iGloNorm if AnCova
        if iGloNorm==9, dGMsca=-D.iGMsca(D.iGMsca<0); else, dGMsca=iGloNorm; end
        dGMsca = max([0,intersect(iGMsca,dGMsca)]);
        iGMsca = spm_input('GMsca: grand mean scaling','+1','m',...
            sGMsca(iGMsca),iGMsca,find(iGMsca==dGMsca));
    end
    
    
    %-Value for PropSca / GMsca                                     (GM)
    %-------------------------------------------------------------------
    if iGMsca == 9                      %-Not scaling (GMsca or PropSca)
        GM = 0;                         %-Set GM to zero when not scaling
    else                                %-Ask user value of GM
        if iGloNorm==8
            str = 'PropSca global mean to';
        else
            str = [strrep(sGMsca{iGMsca},'scaling of','scale'),' to'];
        end
        GM = spm_input(str,'+1','r',D.GM,1);
        %-If GM is zero then don't GMsca! or PropSca GloNorm
        if GM==0, iGMsca=9; if iGloNorm==8, iGloNorm=9; end, end
    end
    
    %-Sort out description strings for GloNorm and GMsca
    %-------------------------------------------------------------------
    sGloNorm = sGloNorm{iGloNorm};
    sGMsca   = sGMsca{iGMsca};
    if iGloNorm==8
        sGloNorm = sprintf('%s to %-4g',sGloNorm,GM);
    elseif iGMsca<8
        sGMsca   = sprintf('%s to %-4g',sGMsca,GM);
    end
    
    
    %-Global centering (for AnCova GloNorm)                         (GC)
    %-------------------------------------------------------------------
    %-Specify the centering option for the global covariate for AnCova
    %-Basically, if 'GMsca'ling then should centre to GM (iGC=11). Otherwise,
    % should centre in similar fashion to AnCova (i.e. by the same factor(s)),
    % such that models are seperable (iGC=10). This is particularly important
    % for subject specific condition effects if then passed on to a second-level
    % model. (See also spm_adjmean_ui.m) SPM96 (& earlier) used to just centre
    % GX around its (overall) mean (iGC=1).
    
    %-This code allows more general options to be specified (but is complex)
    %-Setting D.iGC=[-10,-11] gives the standard choices above
    
    %-If not doing AnCova then GC is irrelevant
    if ~any(iGloNorm == [1:7])
        iGC = 12;
        gc  = [];
    else
        %-Annotate options 10 & 11 with specific details
        %---------------------------------------------------------------
        %-Tag '(as implied by AnCova)' with actual AnCova situation
        sCC{10} = [sCC{iGloNorm},' (<= ',sGloNorm,')'];
        %-Tag 'GM' case with actual GM & GMsca case
        sCC{11} = sprintf('around GM=%g (i.e. %s after grand mean scaling)',...
            GM,strrep(sCC{iGMsca},'around ',''));
        
        %-Constuct vector of allowable iGC
        %---------------------------------------------------------------
        %-Weed out redundent factor combinations from pre-set allowable options
        iGC = intersect(abs(D.iGC),find([1,bFI,1,1,1,1]));
        %-Omit 'GM' option if didn't GMsca (iGMsca~=8 'cos doing AnCova)
        if any(iGMsca==[8,9]), iGC = setdiff(iGC,11); end
        %-Omit 'GM' option if same as '(as implied by AnCova)'
        if iGloNorm==iGMsca, iGC = setdiff(iGC,11); end
        
        %-If there's a choice, set defaults (if any), & get answer
        %---------------------------------------------------------------
        if length(iGC)>1
            dGC = max([0,intersect(iGC,-D.iGC(D.iGC<0))]);
            str = 'Centre global covariate';
            if iGMsca<8, str = [str,' (after grand mean scaling)']; end
            iGC = spm_input(str,'+1','m',sCC(iGC),iGC,find(iGC==dGC));
        elseif isempty(iGC)
            error('Configuration error: empty iGC')
        end
        
        %-If 'user specified' then get value
        %---------------------------------------------------------------
        if iGC==9
            gc     = spm_input('Centre globals around','+0','r',D.GM,1);
            sCC{9} = sprintf('%s of %g',sCC{iGC},gc);
        else
            gc  = 0;
        end
    end
    
    
    %-Thresholds & masks defining voxels to analyse               (MASK)
    %===================================================================
    GUIpos = spm_input('!NextPos');
    
    %-Analysis threshold mask
    %-------------------------------------------------------------------
    %-Work out available options:
    % -Inf=>None, real=>absolute, complex=>proportional, (i.e. times global)
    M_T = D.M_.T; if isempty(M_T), M_T = [-Inf, 100, 0.8*sqrt(-1)]; end
    M_T = { 'none',     M_T(min(find(isinf(M_T))));...
            'absolute', M_T(min(find(isfinite(M_T)&(M_T==real(M_T)))));...
            'relative', M_T(min(find(isfinite(M_T)&(M_T~=real(M_T)))))  };
    
    %-Work out available options
    %-If there's a choice between proportional and absolute then ask
    %-------------------------------------------------------------------
    q = ~[isempty(M_T{1,2}), isempty(M_T{2,2}), isempty(M_T{3,2})];
    
    if all(q(2:3))
        tmp = spm_input('Threshold masking',GUIpos,'b',M_T(q,1),find(q));
        q(setdiff([1:3],tmp))=0;
    end
    
    %-Get mask value - note that at most one of q(2:3) is true
    %-------------------------------------------------------------------
    if ~any(q)              %-Oops - nothing specified!
        M_T = -Inf;
    elseif all(q==[1,0,0])          %-no threshold masking
        M_T = -Inf;
    else                    %-get mask value
        if q(1),    args = {'br1','None',-Inf,abs(M_T{1+find(q(2:3)),2})};
        else,       args = {'r',abs(M_T{1+find(q(2:3)),2})}; end
        if q(2)
            M_T = spm_input('threshold',GUIpos,args{:});
        elseif q(3)
            M_T = spm_input('threshold (relative to global)',GUIpos,...
                args{:});
            if isfinite(M_T) & isreal(M_T), M_T=M_T*sqrt(-1); end
        else
            error('Shouldn''t get here!')
        end
    end
    
    %-Make a description string
    %-------------------------------------------------------------------
    if isinf(M_T)
        xsM.Analysis_threshold = 'None (-Inf)';
    elseif isreal(M_T)
        xsM.Analysis_threshold = sprintf('images thresholded at %6g',M_T);
    else
        xsM.Analysis_threshold = sprintf(['images thresholded at %6g ',...
                'times global'],imag(M_T));
    end
    
    
    %-Implicit masking: Ignore zero voxels in low data-types?
    %-------------------------------------------------------------------
    % (Implicit mask is NaN in higher data-types.)
    type = getfield(spm_vol(P{1,1}),'dt')*[1,0]';
    if ~spm_type(type,'nanrep')
        switch D.M_.I
        case Inf,    M_I = spm_input('Implicit mask (ignore zero''s)?',...
                '+1','y/n',[1,0],1);        %-Ask
        case {0,1}, M_I = D.M_.I;           %-Pre-specified
        otherwise,  error('unrecognised D.M_.I type')
        end
        
        if M_I, xsM.Implicit_masking = 'Yes: zero''s treated as missing';
        else,   xsm.Implicit_masking = 'No'; end
    else
        M_I = 1;
        xsM.Implicit_masking = 'Yes: NaN''s treated as missing';
    end
    
    
    %-Explicit mask images (map them later...)
    %-------------------------------------------------------------------
    switch(D.M_.X)
    case Inf,   M_X = spm_input('explicitly mask images?','+1','y/n',[1,0],2);
    case {0,1}, M_X = D.M_.X;
    otherwise,  error('unrecognised D.M_.X type')
    end
    if M_X, M_P = spm_select(Inf,'image','select mask images'); else, M_P = {}; end
    
    
    %-Global calculation                                        (GXcalc)
    %===================================================================
    iGXcalc = abs(D.iGXcalc);
    %-Only offer "omit" option if not doing any GloNorm, GMsca or PropTHRESH
    if ~(iGloNorm==9 & iGMsca==9 & (isinf(M_T)|isreal(M_T)))
        iGXcalc = intersect(iGXcalc,[2:size(sGXcalc,1)]);
    end
    if isempty(iGXcalc)
        error('no GXcalc options')
    elseif length(iGXcalc)>1
        %-User choice of global calculation options, default is negative
        dGXcalc = max([1,intersect(iGXcalc,-D.iGXcalc(D.iGXcalc<0))]);
        iGXcalc = spm_input('Global calculation','+1','m',...
            sGXcalc(iGXcalc),iGXcalc,find(iGXcalc==dGXcalc));
    else
        iGXcalc = abs(D.iGXcalc);
    end
    
    if iGXcalc==2               %-Get user specified globals
        g = spm_input('globals','+0','r',[],[nScan,1]);
    end
    sGXcalc = sGXcalc{iGXcalc};
    
    
    % Non-sphericity correction (set xVi.var and .dep)
    %===================================================================
    xVi.I   = I;
    nL      = max(I);                                % number of levels
    mL      = find(nL > 1);                          % multilevel factors
    xVi.var = sparse(1,4);                           % unequal variances
    xVi.dep = sparse(1,4);                           % dependencies

    if length(mL) > 1

        % repeated measures design
        %---------------------------------------------------------------
        if spm_input('non-sphericity correction?','+1','y/n',[1,0],0)

            % make menu strings
            %-----------------------------------------------------------
            for i = 1:4
                mstr{i} = sprintf('%s (%i levels)',D.sF{i},nL(i));
            end
            mstr = mstr(mL);
            
            % are errors identical
            %-----------------------------------------------------------
            if spm_input('are errors identical','+1','y/n',[0,1],0)
                str    = 'unequal variances are between';
                [i j]  = min(nL(mL));
                i      = spm_input(str,'+0','m',mstr,[],j);

                % set in xVi and eliminate from dependency option
                %-------------------------------------------------------
                xVi.var(mL(i)) = 1;
                mL(i)          = [];
                mstr(i)        = [];
            end
            
            % are errors independent
            %-----------------------------------------------------------
            if spm_input('are errors independent','+1','y/n',[0,1],0)
                str        = ' dependencies are within';
                [i j]      = max(nL(mL));
                i          = spm_input(str,'+0','m',mstr,[],j);

                % set in xVi
                %-------------------------------------------------------
                xVi.dep(mL(i)) = 1;
            end

        end
    end
    
    %-Place covariance components Q{:} in xVi.Vi
    %-------------------------------------------------------------------
    xVi     = spm_non_sphericity(xVi);

    %===================================================================
    % - C O N F I G U R E   D E S I G N
    %===================================================================
    spm('FigName','Stats: configuring',Finter,CmdLine);
    spm('Pointer','Watch');
    
    
    %-Images & image info: Map Y image files and check consistency of
    % dimensions and orientation / voxel size
    %===================================================================
    fprintf('%-40s: ','Mapping files')                               %-#
    VY    = spm_vol(char(P));
    
    
    %-Check compatability of images (Bombs for single image)
    %-------------------------------------------------------------------
    spm_check_orientations(VY);
    
    fprintf('%30s\n','...done')                                      %-#
    
    
    %-Global values, scaling and global normalisation
    %===================================================================
    %-Compute global values
    %-------------------------------------------------------------------
    switch iGXcalc, case 1
        %-Don't compute => no GMsca (iGMsca==9) or GloNorm (iGloNorm==9)
        g = [];
    case 2
        %-User specified globals
    case 3
        %-Compute as mean voxel value (within per image fullmean/8 mask)
        g     = zeros(nScan,1 );
        fprintf('%-40s: %30s','Calculating globals',' ')             %-#
        for i = 1:nScan
            str = sprintf('%3d/%-3d',i,nScan);
            fprintf('%s%30s',repmat(sprintf('\b'),1,30),str)%-#
            g(i) = spm_global(VY(i));
        end
        fprintf('%s%30s\n',repmat(sprintf('\b'),1,30),'...done')       %-#
    otherwise
        error('illegal iGXcalc')
    end
    rg = g;
    
    
    fprintf('%-40s: ','Design configuration')                        %-#
    
    
    %-Scaling: compute global scaling factors gSF required to implement
    % proportional scaling global normalisation (PropSca) or grand mean
    % scaling (GMsca), as specified by iGMsca (& iGloNorm)
    %-------------------------------------------------------------------
    switch iGMsca, case 8
        %-Proportional scaling global normalisation
        if iGloNorm~=8, error('iGloNorm-iGMsca(8) mismatch for PropSca'), end
        gSF    = GM./g;
        g      = GM*ones(nScan,1);
    case {1,2,3,4,5,6,7}
        %-Grand mean scaling according to iGMsca
        gSF    = GM./spm_meanby(g,eval(CCforms{iGMsca}));
        g      = g.*gSF;
    case 9
        %-No grand mean scaling
        gSF    = ones(nScan,1);
    otherwise
        error('illegal iGMsca')
    end
    
    
    %-Apply gSF to memory-mapped scalefactors to implement scaling
    %-------------------------------------------------------------------
    for i = 1:nScan
        VY(i).pinfo(1:2,:) = VY(i).pinfo(1:2,:)*gSF(i);
    end
    
    
    %-AnCova: Construct global nuisance covariates partition (if AnCova)
    %-------------------------------------------------------------------
    if any(iGloNorm == [1:7])
        
        %-Centre global covariate as requested
        %---------------------------------------------------------------
        switch iGC, case {1,2,3,4,5,6,7}    %-Standard sCC options
            gc = spm_meanby(g,eval(CCforms{iGC}));
        case 8                  %-No centering
            gc = 0;
        case 9                  %-User specified centre
            %-gc set above
        case 10                 %-As implied by AnCova option
            gc = spm_meanby(g,eval(CCforms{iGloNorm}));
        case 11                 %-Around GM
            gc = GM;
        otherwise               %-unknown iGC
            error('unexpected iGC value')
        end
        
        
        %-AnCova - add scaled centred global to DesMtx `G' partition
        %---------------------------------------------------------------
        rcname     = 'global'; 
        tI         = [eval(CFIforms{iGloNorm,1}),g - gc];
        tConst     = CFIforms{iGloNorm,2};
        tFnames    = [eval(CFIforms{iGloNorm,3}),{rcname}];
        [f,gnames]  = spm_DesMtx(tI,tConst,tFnames);
        clear tI tConst tFnames
        
        %-Save GX info in xC struct for reference
        %---------------------------------------------------------------
        str     = {sprintf('%s: %s',dstr{2},rcname)};
        if any(iGMsca==[1:7]), str=[str;{['(after ',sGMsca,')']}]; end
        if iGC ~= 8, str=[str;{['used centered ',sCC{iGC}]}]; end
        if iGloNorm > 1
            str=[str;{['fitted as interaction ',sCFI{iGloNorm}]}]; 
        end
        tmp  = struct(  'rc',rg.*gSF,       'rcname',rcname,...
            'c',f,          'cname' ,{gnames},...
            'iCC',iGC,      'iCFI'  ,iGloNorm,...
            'type',         3,...
            'cols',[1:size(f,2)] + size([H C B G],2),...
            'descrip',      {str}       );
        
        G = [G,f]; Gnames = [Gnames; gnames];
        if isempty(xC), xC = tmp; else, xC = [xC,tmp]; end
        
        
    elseif iGloNorm==8 | iGXcalc>1
        
        %-Globals calculated, but not AnCova: Make a note of globals
        %---------------------------------------------------------------
        if iGloNorm==8
            str = { 'global values: (used for proportional scaling)';...
                    '("raw" unscaled globals shown)'};
        elseif isfinite(M_T) & ~isreal(M_T)
            str = { 'global values: (used to compute analysis threshold)'};
        else
            str = { 'global values: (computed but not used)'};
        end
        
        rcname ='global';
        tmp     = struct(   'rc',rg,    'rcname',rcname,...
            'c',{[]},   'cname' ,{{}},...
            'iCC',0,    'iCFI'  ,0,...
            'type',     3,...
            'cols',     {[]},...
            'descrip',  {str}           );
        
        if isempty(xC), xC = tmp; else, xC = [xC,tmp]; end
    end
    
    
    %-Save info on global calculation in xGX structure
    %-------------------------------------------------------------------
    xGX = struct(...
        'iGXcalc',iGXcalc,  'sGXcalc',sGXcalc,  'rg',rg,...
        'iGMsca',iGMsca,    'sGMsca',sGMsca,    'GM',GM,'gSF',gSF,...
        'iGC',  iGC,        'sGC',  sCC{iGC},   'gc',   gc,...
        'iGloNorm',iGloNorm,    'sGloNorm',sGloNorm);
    
    
    
    %-Construct masking information structure and compute actual analysis
    % threshold using scaled globals (rg.*gSF)
    %-------------------------------------------------------------------
    if isreal(M_T), M_TH =      M_T  * ones(nScan,1);   %-NB: -Inf is real
    else,       M_TH = imag(M_T) * (rg.*gSF); end
    
    if ~isempty(M_P)
        VM  = spm_vol(char(M_P));
        xsM.Explicit_masking = [{'Yes: mask images :'};{VM.fname}'];
    else
        VM  = [];
        xsM.Explicit_masking = 'No';
    end
    xM     = struct('T',M_T, 'TH',M_TH, 'I',M_I, 'VM',{VM}, 'xs',xsM);
    
    
    %-Construct full design matrix (X), parameter names and structure (xX)
    %===================================================================
    X      = [H C B G];
    tmp    = cumsum([size(H,2), size(C,2), size(B,2), size(G,2)]);
    xX     = struct(    'X',        X,...
        'iH',       [1:size(H,2)],...
        'iC',       [1:size(C,2)] + tmp(1),...
        'iB',       [1:size(B,2)] + tmp(2),...
        'iG',       [1:size(G,2)] + tmp(3),...
        'name',     {[Hnames; Cnames; Bnames; Gnames]},...
        'I',        I,...
        'sF',       {D.sF});
    
    
    %-Design description (an nx2 cellstr) - for saving and display
    %===================================================================
    tmp = { sprintf('%d condition, +%d covariate, +%d block, +%d nuisance',...
            size(H,2),size(C,2),size(B,2),size(G,2));...
            sprintf('%d total, having %d degrees of freedom',...
            size(X,2),rank(X));...
            sprintf('leaving %d degrees of freedom from %d images',...
            size(X,1)-rank(X),size(X,1))                };
    xsDes = struct( 'Design',           {D.DesName},...
        'Global_calculation',       {sGXcalc},...
        'Grand_mean_scaling',       {sGMsca},...
        'Global_normalisation',     {sGloNorm},...
        'Parameters',           {tmp}           );
    
    
    fprintf('%30s\n','...done')                                      %-#
    
    
    
    %-Assemble SPM structure
    %===================================================================
    SPM.xY.P    = P;            % filenames
    SPM.xY.VY   = VY;           % mapped data
    SPM.nscan   = size(xX.X,1); % scan number
    SPM.xX      = xX;           % design structure
    SPM.xC      = xC;           % covariate structure
    SPM.xGX     = xGX;          % global structure
    SPM.xVi     = xVi;          % non-sphericity structure
    SPM.xM      = xM;           % mask structure
    SPM.xsDes   = xsDes;        % description
    SPM.SPMid   = SPMid;        % version
    
    %-Save SPM.mat and set output argument
    %-------------------------------------------------------------------
    fprintf('%-40s: ','Saving SPM configuration')                    %-#

    if spm_check_version('matlab','7') >=0
        save('SPM.mat', 'SPM', '-V6');
    else
        save('SPM.mat', 'SPM');
    end;
    fprintf('%30s\n','...SPM.mat saved')                             %-#
    varargout = {SPM};
    
    %-Display Design report
    %===================================================================
    fprintf('%-40s: ','Design reporting')                            %-#
    fname     = cat(1,{SPM.xY.VY.fname}');
    spm_DesRep('DesMtx',SPM.xX,fname,SPM.xsDes)
    fprintf('%30s\n','...done')     
    
    
    %-End: Cleanup GUI
    %===================================================================
    spm_clf(Finter)
    spm('Pointer','Arrow')
    fprintf('%-40s: %30s\n','Completed',spm('time'))                 %-#
    spm('FigName','Stats: configured',Finter,CmdLine);
    spm('Pointer','Arrow')
    fprintf('\n\n')
    
    
    
case 'files&indices'
    %===================================================================
    % - Get files and factor indices
    %===================================================================
    % [P,I] = spm_spm_ui('Files&Indices',DsF,Dn,DbaTime,nV)
    % DbaTime=D.b.aTime; Dn=D.n; DsF=D.sF;
    if nargin<5, nV = 1; else, nV = varargin{5}; end
    if nargin<4, DbaTime = 1; else, DbaTime = varargin{4}; end
    if nargin<3, Dn  = [Inf,Inf,Inf,Inf]; else, Dn=varargin{3}; end
    if nargin<2, DsF = {'Fac1','Fac2','Fac3','Fac4'}; else, DsF=varargin{2}; end
    
    %-Initialise variables
    %-------------------------------------------------------------------
    i4 = [];        % factor 4 index (usually group)
    i3 = [];        % factor 3 index (usually subject), per f4
    i2 = [];        % factor 2 index (usually condition), per f3/f4
    i1 = [];        % factor 1 index (usually replication), per f2/f3/f4
    P  = {};        % cell array of string filenames
    
    %-Accrue filenames and factor level indicator vectors
    %-------------------------------------------------------------------
    bMV = nV>1;
    if isinf(Dn(4)), n4 = spm_input(['#',DsF{4},'''s'],'+1','n1');
    else, n4 = Dn(4); end
    bL4 = n4>1;
    
    ti2 = '';
    GUIpos = spm_input('!NextPos');
    for j4  = 1:n4
        spm_input('!SetNextPos',GUIpos);
        sF4P=''; if bL4, sF4P=[DsF{4},' ',int2str(j4),': ']; end
        if isinf(Dn(3)), n3=spm_input([sF4P,'#',DsF{3},'''s'],'+1','n1');
        else, n3 = Dn(3); end
        bL3 = n3>1;
        
        if DbaTime & Dn(2)>1
            %disp('NB:selecting in time order - manually specify conditions')
            %-NB: This means f2 levels might not be 1:n2
            GUIpos2 = spm_input('!NextPos');
            for j3 = 1:n3
                sF3P=''; if bL3, sF3P=[DsF{3},' ',int2str(j3),': ']; end
                str = [sF4P,sF3P];
                tP  = {};
                n21 = Dn(2)*Dn(1);
                for v=1:nV
                    vstr=''; if bMV, vstr=sprintf(' (var-%d)',v); end
                    ttP = cellstr(spm_select(n21,'image',[str,'select images',vstr]));
                    n21 = length(ttP);
                    tP  = [tP,ttP];
                end
                ti2 = spm_input([str,' ',DsF{2},'?'],GUIpos2,'c',ti2',n21,Dn(2));
                %-Work out i1 & check
                [tl2,null,j] = unique(ti2);
                tn1 = zeros(size(tl2)); ti1 = zeros(size(ti2));
                for i=1:length(tl2)
                    tn1(i)=sum(j==i); ti1(ti2==tl2(i))=1:tn1(i); end
                if isfinite(Dn(1)) & any(tn1~=Dn(1))
                    %-#i1 levels mismatches specification in Dn(1)
                    error(sprintf('#%s not %d as pre-specified',DsF{1},Dn(1)))
                end
                P  = [P;tP];
                i4 = [i4; j4*ones(n21,1)];
                i3 = [i3; j3*ones(n21,1)];
                i2 = [i2; ti2];
                i1 = [i1; ti1];
            end
            
        else
            
            if isinf(Dn(2))
                n2 = spm_input([sF4P,'#',DsF{2},'''s'],'+1','n1');
            else
                n2 = Dn(2);
            end
            bL2 = n2>1;
            
            if n2==1 & Dn(1)==1 %-single scan per f3 (subj)
                %disp('NB:single scan per f3')
                str = [sF4P,'select images, ',DsF{3},' 1-',int2str(n3)];
                tP = {};
                for v=1:nV
                    vstr=''; if bMV, vstr=sprintf(' (var-%d)',v); end
                    ttP = cellstr(spm_select(n3,'image',[str,vstr]));
                    tP = [tP,ttP];
                end
                P   = [P;tP];
                i4  = [i4; j4*ones(n3,1)];
                i3  = [i3; [1:n3]'];
                i2  = [i2; ones(n3,1)];
                i1  = [i1; ones(n3,1)];
            else
                %-multi scan per f3 (subj) case
                %disp('NB:multi scan per f3')
                for j3 = 1:n3
                    sF3P=''; if bL3, sF3P=[DsF{3},' ',int2str(j3),': ']; end
                    if Dn(1)==1
                        %-No f1 (repl) within f2 (cond)
                        %disp('NB:no f1 within f2')
                        str = [sF4P,sF3P,'select images: ',DsF{2},...
                                ' 1-',int2str(n2)];
                        tP = {};
                        for v=1:nV
                            vstr=''; if bMV, vstr=sprintf(' (var-%d)',v); end
                            ttP = cellstr(spm_select(n2,'image',[str,vstr]));
                            tP = [tP,ttP];
                        end
                        P   = [P;tP];
                        i4  = [i4; j4*ones(n2,1)];
                        i3  = [i3; j3*ones(n2,1)];
                        i2  = [i2; [1:n2]'];
                        i1  = [i1; ones(n2,1)];
                    else
                        %-multi f1 (repl) within f2 (cond)
                        %disp('NB:f1 within f2')
                        for j2  = 1:n2
                            sF2P='';
                            if bL2, sF2P=[DsF{2},' ',int2str(j2),': ']; end
                            str = [sF4P,sF3P,sF2P,' select images...'];
                            tP  = {};
                            n1  = Dn(1);
                            for v=1:nV
                                vstr=''; if bMV, vstr=sprintf(' (var-%d)',v); end
                                ttP = cellstr(spm_select(n1,'image',[str,vstr]));
                                n1  = length(ttP);
                                tP  = [tP,ttP];
                            end
                            P   = [P;tP];
                            i4  = [i4; j4*ones(n1,1)];
                            i3  = [i3; j3*ones(n1,1)];
                            i2  = [i2; j2*ones(n1,1)];
                            i1  = [i1; [1:n1]'];
                        end                         % (for j2)
                    end                             % (if Dn(1)==1)
                end                                 % (for j3)
            end                                     % (if  n2==1 &...)
        end                                         % (if DbaTime & Dn(2)>1)
    end                                             % (for j4)
    varargout = {P,[i1,i2,i3,i4]};
    
    
case 'desdefs_stats'
    
    %===================================================================
    % - Basic Stats Design definitions...
    %===================================================================
    % D = spm_spm_ui('DesDefs_Stats');
    % These are the basic Stats design definitions...
    
    %-Note: struct expands cell array values to give multiple records:
    %       => must embed cell arrays within another cell array!
    %-Negative indices indicate defaults (first used)
    
    D = struct(...
        'DesName','One sample t-test',...
        'n',    [Inf 1 1 1],    'sF',{{'obs','','',''}},...
        'Hform',        'I(:,2),''-'',''mean''',...
        'Bform',        '[]',...
        'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
        'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
        'iGloNorm',9,'iGC',12,...
        'M_',struct('T',-Inf,'I',Inf,'X',Inf),...
        'b',struct('aTime',0));
    
    D = [D, struct(...
            'DesName','Two sample t-test',...
            'n',    [Inf 2 1 1],    'sF',{{'obs','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',1))];
    
    D = [D, struct(...
            'DesName','Paired t-test',...
            'n',    [1 2 Inf 1],    'sF',{{'','cond','pair',''}},...
            'Hform',        'I(:,2),''-'',''condition''',...
            'Bform',        'I(:,3),''-'',''\gamma''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','One way Anova',...
            'n',    [Inf Inf 1 1],  'sF',{{'repl','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        '[]',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','One way Anova (with constant)',...
            'n',    [Inf Inf 1 1],  'sF',{{'repl','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','One way Anova (Within-subjects)',...
            'n',    [1 Inf Inf 1],'sF',{{'repl','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','Simple regression (correlation)',...
            'n',    [Inf 1 1 1],    'sF',{{'repl','','',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,2),''-'',''\mu''',...
            'nC',[1,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    
    D = [D, struct(...
            'DesName','Multiple regression',...
            'n',    [Inf 1 1 1],    'sF',{{'repl','','',''}},...
            'Hform',        '[]',...
            'Bform',        '[]',...
            'nC',[Inf,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','Multiple regression (with constant)',...
            'n',    [Inf 1 1 1],    'sF',{{'repl','','',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,2),''-'',''\mu''',...
            'nC',[Inf,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','AnCova',...
            'n',    [Inf Inf 1 1],  'sF',{{'repl','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,1],'iCC',{{8,1}},'iCFI',{{1,1}},...
            'iGXcalc',[-1,2,3],'iGMsca',[1,-9],'GM',[],...
            'iGloNorm',9,'iGC',12,...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',0))];
    
    varargout = {D};
    
    
case 'desdefs_pet'
    %===================================================================
    % - Standard (SPM99) PET/SPECT Design definitions...
    %===================================================================
    % D = spm_spm_ui('DesDefs_PET');
    % These are the standard PET design definitions...
    
    %-Single subject
    %-------------------------------------------------------------------
    D = struct(...
        'DesName','Single-subject: conditions & covariates',...
        'n',    [Inf Inf 1 1],  'sF',{{'repl','condition','',''}},...
        'Hform',        'I(:,2),''-'',''cond''',...
        'Bform',        'I(:,3),''-'',''\mu''',...
        'nC',[Inf,Inf],'iCC',{{[-1,3,8],[-1,8]}},'iCFI',{{[1,3],1}},...
        'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
        'iGloNorm',[1,8,9],'iGC',10,...
        'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
        'b',struct('aTime',1));
    
    D = [D, struct(...
            'DesName','Single-subject: covariates only',...
            'n',    [Inf 1 1 1],    'sF',{{'repl','','',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[Inf,Inf],'iCC',{{[-1,8],[-1,8]}},'iCFI',{{1,1}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
            'iGloNorm',[1,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',1))];
    
    %-Multi-subject
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','Multi-subj: conditions & covariates',...
            'n',[Inf Inf Inf 1],    'sF',{{'repl','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{[1,3,4,8],[1,4,8]}},'iCFI',{{[1,3,-4],[1,-4]}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-4,9],'GM',50,...
            'iGloNorm',[4,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',1))];
    
    D = [D, struct(...
            'DesName','Multi-subj: cond x subj  interaction & covariates',...
            'n',[Inf Inf Inf 1],    'sF',{{'repl','condition','subject',''}},...
            'Hform',        'I(:,[3,2]),''-'',{''subj'',''cond''}',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{[1,3,4,8],[1,4,8]}},'iCFI',{{[1,3,-4],[1,-4]}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-4,9],'GM',50,...
            'iGloNorm',[4,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',1))];
    
    D = [D, struct(...
            'DesName','Multi-subj: covariates only',...
            'n',[Inf 1 Inf 1],  'sF',{{'repl','','subject',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{[1,4,8],[1,4,8]}},'iCFI',{{[1,-4],[1,-4]}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-4,9],'GM',50,...
            'iGloNorm',[4,8:9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-Multi-group
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','Multi-group: conditions & covariates',...
            'n',[Inf Inf Inf Inf],  'sF',{{'repl','condition','subject','group'}},...
            'Hform',        'I(:,[4,2]),''-'',{''stud'',''cond''}',...
            'Bform',        'I(:,[4,3]),''-'',{''stud'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{[5:8],[5,7,8]}},'iCFI',{{[1,5,6,-7],[1,5,-7]}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-7,9],'GM',50,...
            'iGloNorm',[7,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',1))];
    
    D = [D, struct(...
            'DesName','Multi-group: covariates only',...
            'n',[Inf 1 Inf Inf],    'sF',{{'repl','','subject','group'}},...
            'Hform',        '[]',...
            'Bform',        'I(:,[4,3]),''-'',{''stud'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{[5,7,8],[5,7,8]}},'iCFI',{{[1,5,-7],[1,5,-7]}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-7,9],'GM',50,...
            'iGloNorm',[7,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-Population comparisons
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName',...
            'Population main effect: 2 cond''s, 1 scan/cond (paired t-test)',...
            'n',[1 2 Inf 1],    'sF',{{'','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
            'iGloNorm',[8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName',...
            'Dodgy population main effect: >2 cond''s, 1 scan/cond',...
            'n',[1 Inf Inf 1],  'sF',{{'','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
            'iGloNorm',[8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','Compare-populations: 1 scan/subject (two sample t-test)',...
            'n',[Inf 2 1 1],    'sF',{{'subject','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
            'iGloNorm',[8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','Compare-populations: 1 scan/subject (AnCova)',...
            'n',[Inf 2 1 1],    'sF',{{'subject','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[0,Inf],'iCC',{{8,1}},'iCFI',{{1,1}},...
            'iGXcalc',[1,2,-3],'iGMsca',[-1,9],'GM',50,...
            'iGloNorm',[1,8,9],'iGC',10,...
            'M_',struct('T',[0,0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-The Full Monty!
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','The Full Monty...',...
            'n',[Inf Inf Inf Inf],  'sF',{{'repl','cond','subj','group'}},...
            'Hform',        'I(:,[4,2]),''-'',{''stud'',''cond''}',...
            'Bform',        'I(:,[4,3]),''-'',{''stud'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{[1:8],[1:8]}},'iCFI',{{[1:7],[1:7]}},...
            'iGXcalc',[1,2,3],'iGMsca',[1:7],'GM',50,...
            'iGloNorm',[1:9],'iGC',[1:11],...
            'M_',struct('T',[-Inf,0,0.8*sqrt(-1)],'I',Inf,'X',Inf),...
            'b',struct('aTime',1))];
    
    
    varargout = {D};
    
case 'desdefs_pet96'
    %===================================================================
    % - SPM96 PET/SPECT Design definitions...
    %===================================================================
    % D = spm_spm_ui('DesDefs_PET96');
    
    %-Single subject
    %-------------------------------------------------------------------
    D = struct(...
        'DesName','SPM96:Single-subject: replicated conditions',...
        'n',    [Inf Inf 1 1],  'sF',{{'repl','condition','',''}},...
        'Hform',        'I(:,2),''-'',''cond''',...
        'Bform',        'I(:,3),''-'',''\mu''',...
        'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
        'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
        'iGloNorm',[1,8,9],'iGC',10,...
        'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
        'b',struct('aTime',0));
    
    D = [D, struct(...
            'DesName','SPM96:Single-subject: replicated conditions & covariates',...
            'n',    [Inf Inf 1 1],  'sF',{{'repl','condition','',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Single-subject: covariates only',...
            'n',    [Inf 1 1 1],    'sF',{{'repl','','',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,3),''-'',''\mu''',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-Multi-subject
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','SPM96:Multi-subject: different conditions',...
            'n',    [1 Inf Inf 1],  'sF',{{'','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''scancond''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,4,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-subject: replicated conditions',...
            'n',[Inf Inf Inf 1],    'sF',{{'repl','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,4,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-subject: different conditions & covariates',...
            'n',    [1 Inf Inf 1],  'sF',{{'','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''cond''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{[1,4],[1,4]}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,4,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-subject: replicated conditions & covariates',...
            'n',[Inf Inf Inf 1],    'sF',{{'repl','condition','subject',''}},...
            'Hform',        'I(:,2),''-'',''condition''',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{[1,3,4],[1,4]}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,4,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-subject: covariates only',...
            'n',[Inf 1 Inf 1],  'sF',{{'repl','','subject',''}},...
            'Hform',        '[]',...
            'Bform',        'I(:,3),''-'',''subj''',...
            'nC',[Inf,Inf],'iCC',{{[1,4,8],[1,4,8]}},'iCFI',{{[1,4],[1,4]}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,4,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-Multi-study
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','SPM96:Multi-study: different conditions',...
            'n',[1 Inf Inf Inf],    'sF',{{'','cond','subj','study'}},...
            'Hform',        'I(:,[4,2]),''-'',{''study'',''cond''}',...
            'Bform',        'I(:,[4,3]),''-'',{''study'',''subj''}',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,5,9],'GM',50,...
            'iGloNorm',[1,5,7,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-study: replicated conditions',...
            'n',[Inf Inf Inf Inf],  'sF',{{'repl','cond','subj','study'}},...
            'Hform',        'I(:,[4,2]),''-'',{''study'',''condition''}',...
            'Bform',        'I(:,[4,3]),''-'',{''study'',''subj''}',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,5,9],'GM',50,...
            'iGloNorm',[1,5,7,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-study: different conditions & covariates',...
            'n',[1 Inf Inf Inf],    'sF',{{'','cond','subj','study'}},...
            'Hform',        'I(:,[4,2]),''-'',{''study'',''cond''}',...
            'Bform',        'I(:,[4,3]),''-'',{''study'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{[1,5,6,7],[1,5,7]}},...
            'iGXcalc',3,'iGMsca',[1,5,9],'GM',50,...
            'iGloNorm',[1,5,7,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-study: replicated conditions & covariates',...
            'n',[Inf Inf Inf Inf],  'sF',{{'','cond','subj','study'}},...
            'Hform',        'I(:,[4,2]),''-'',{''study'',''condition''}',...
            'Bform',        'I(:,[4,3]),''-'',{''study'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{[1,5,6,7],[1,5,7]}},...
            'iGXcalc',3,'iGMsca',[1,5,9],'GM',50,...
            'iGloNorm',[1,5,7,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    D = [D, struct(...
            'DesName','SPM96:Multi-study: covariates only',...
            'n',[Inf 1 Inf Inf],    'sF',{{'repl','','subj','study'}},...
            'Hform',        '[]',...
            'Bform',        'I(:,[4,3]),''-'',{''study'',''subj''}',...
            'nC',[Inf,Inf],'iCC',{{1,1}},'iCFI',{{[1,5,7],[1,5,7]}},...
            'iGXcalc',3,'iGMsca',[1,5,9],'GM',50,...
            'iGloNorm',[1,5,7,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    %-Group comparisons
    %-------------------------------------------------------------------
    D = [D, struct(...
            'DesName','SPM96:Compare-groups: 1 scan per subject',...
            'n',[Inf Inf 1 1],  'sF',{{'subject','group','',''}},...
            'Hform',        'I(:,2),''-'',''group''',...
            'Bform',        '[]',...
            'nC',[0,0],'iCC',{{8,8}},'iCFI',{{1,1}},...
            'iGXcalc',3,'iGMsca',[1,9],'GM',50,...
            'iGloNorm',[1,8,9],'iGC',10,...
            'M_',struct('T',[0.8*sqrt(-1)],'I',0,'X',0),...
            'b',struct('aTime',0))];
    
    varargout = {D};
    
    
otherwise
    %===================================================================
    % - U N K N O W N   A C T I O N
    %===================================================================
    warning(['Illegal Action string: ',Action])
    
    %===================================================================
    % - E N D
    %===================================================================
end

%=======================================================================
%- S U B - F U N C T I O N S
%=======================================================================

function str = sf_estrrep(str,srstr)
%=======================================================================
for i = 1:size(srstr,1)
    str = strrep(str,srstr{i,1},srstr{i,2});
end